Furnace Lining Heat Insulation Outside Insulation Board Eco -
Weidi Decorative Insulation Board overall dimension specification
Insulation Bare Board is based on the principle of microporous
,made by various materials through special processing.Its thermal
conductivity rate is lower than the stillness air ,and almost
ceramic fiber insulation materials’1/4 to 1/10,which is the most lowest conductivity rate among the
other solid materials .Also have addressed worldwide insulation
problems ,it is a unique and the best choice in some high
temperature equipment that strictly need space and weight and have
already motivated the innovation of other relevant insulation
equipment design .
The weight of traditional dry hanging stone thermal insulation
system is 120kg/m2.
The weight of XGZ thermal insulation system is less 30 kg/m2.
2, Fine corrosion-resistant property
Insulation material: PU has good organic reagent resistance
Construction technology: The use of XGZ decorative PU insulation
panel removes steel joist and fastenings, which avoids safety
problems caused by corrosion.
3, Excellent Fireproof Performance
The fire rating of the XGZ decorative PU insulation panel is B1
level. Polyurethane is thermosetting resin, while EPS and XPS are
thermoplastic resin. A fire resistance test shows that high
temperature carbonizes thermosetting resin which can resist from
falling off for 36 minutes, while when temperature reaches to 70°C,
it can soften EPS and XPS, and when temperature reaches to 150°C,
it can liquify EPS and XPS which cause secondary disaster directly.
4,Shorten Construction Period
The use of XGZ decorative PU insulation panels can shorten the
construction period. The construction period is 2/3 shorter than
that of the traditional decorative insulation construction.
5,Reduce the Influence by Human Factors
The XGZ decorative insulation panels are compounded in the factory,
which simplify the complex construction prosedure and reduce the
influence by human factors.
6,Save building material
The decorative finishing layer is ultra-thin stone, whose thickness
is only 8mm, while the traditional dry hanging stone is 25mm in
thickness, so the use of XGZ panel can save the consumption of
stone and steel
1. All installation and decoration work are done in one time, SIDI
board weight just 3~18kg/sqm after installation;
2.The weight of traditional coating finish polystyrene board with
thin plastering system is about 12 kg/sqm, tile coating decoration
wall weight about 50 kg/sqm, the bearing of the building with dry
hanging stone weight up to 60~100 kg/sqm;
3.Supposing a building with10,000 sqm outside wall, only the
decorative cladding material reaches 50~100tons,however, SIDI board
integrated system’s construction bearing is 1/5 to 1/15 of the
traditional insulation and decorative wall system.